Smart Metering Devices

Lansen Smart Metering Devices are designed for the wireless M-BUS protocol EN13757-3/4:2013 S1-M, C1 and T1 and are compatible with OMS V4 (Open Metering System).

The devices have sleek and discrete design and are easy to install. The hardware is manufactured using top of the line components and more than 50000 units have been deployed. The products are ready out of the box and can be ordered customized with specific configurations, such as transmission interval, manufacture code and data format.

Key features of these devices are:

  • Superb antenna design to achieve long range
  • AES-128 encryption, OMS V4
  • Very long battery life, typical at least 16 years
  • Wide operating temperature range
  • Works right out the box, with easy installation
  • Sabotage alarm if unit is opened or removed (not all products)
  • Low battery alarm

 

Leakage detector: LAN-WMBUS-G2-LDS/LDP

DEVICE
The Lansen leakage detector alerts as soon as a leakage is detected. The device detects water leakage on the floor when connected to a sensor cable or other sensor that conducts current when exposed to water.

USAGE
The device supports up to two leakage cables and can be used where leakage could occur, for example, under a dishwasher, in the basement, or wherever there is a junction that is of concern.

MEASUREMENTS
Every message contains the leakage status and battery level. The message is sent at configured interval or as soon as leakage is detected.

LIFETIME
Up to 16 years (typically 14 years) battery lifetime, depending on configuration and operating temperature.

For more information please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
QUICK INSTALLATION GUIDE (LAN-WMBUS-G2-LDS)[Link]
QUICK INSTALLATION GUIDE (LAN-WMBUS-G2-LDP)[Link]
CONFIGURATION OF DEVICE[Link]
WMBUS DATA FORMAT[Link]
Accessories
Article nameDescription
LAN-CF-CABLELansen Configuration Cable: Needed to configure devices
LAN-LC-21-200-75Leakage cable + 5x adhesive clips for secure mounting of the cable

Smoke detector: LAN-WMBUS-SMK-1

DEVICE
The OMS compliant Lansen smoke detector alerts as soon as smoke is detected. Fully supervised for low battery and malfunction. Manual test button helps to verify battery status and alarm operation. The device is automatically powered on when mounted on the ceiling for fast and efficient installation. The device is also automatically powered off when removed from the installation.

USAGE
The device can be used where there is a need to remotely monitor that a smoke detector is installed and is working correctly.

MEASUREMENTS
Once every 13 minutes device wirelesses transmits a status message containing the status of the smoke detector.

WARNINGS
BATTERY: Low battery
SMOKE: Smoke present (Alarm)
END OF LIFE: Device is ending its max service time of 10 years
MALFUNCTION: Malfunction warning
NO CONNECTION: No connection between the radio – smoke sensor
MANUAL TEST: Manual test performed

For more information please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
USER MANUAL[Link]
WMBUS DATA FORMAT[Link]

Door and windows monitoring: LAN-WMBUS-M2

DEVICE
The Lansen door and window device alerts as soon as a door or windows is opened or closed. It is possible to use an external reed relay and magnet, as well the internal onboard reed relay to increase the functionality of the device.

USAGE
The device consist of two parts; a magnet and a sensor. A Wireless MBUS message is sent every time these are separated or rejoined.

MEASUREMENTS
The total number of openings is sent every 15 minutes using the Wireless MBUS protocol. This makes the sensor ideal for integration in data collecting systems, for energy management and HVAC control.

LIFETIME
Up to 16 years battery lifetime

For more information please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
QUICK INSTALLATION GUIDE[Link]
CONFIGURATION OF DEVICE[Link]
WMBUS DATA FORMAT[Link]
Accessories
Article nameDescription
LAN-EXT-MAG-ACable with external magnet detection (reed relay)
LAN-CF-CABLELansen Configuration Cable: Needed to configure devices

Dry contact device: LAN-WMBUS-G2-DC

DEVICE
This device alerts as soon as a dry contact switches state and can be connected to dry contacts such as relays or reed switches.

USAGE
The device supports up to two dry contacts and can be used for monitoring the state of a dry contact, such as relays to a motor to see if it is running or monitoring a valve to see if it is open or closed.  

MEASUREMENTS
Every message contains the dry contact status and battery level. The message is sent at configured interval or as soon as a dry contact switch is detected.

LIFETIME
Up to 16 years (typically 14 years) battery lifetime, depending on configuration and operating temperature.

For more information please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
QUICK INSTALLATION GUIDE[Link]
CONFIGURATION OF DEVICE[Link]
WMBUS DATA FORMAT[Link]
Accessories
Article nameDescription
LAN-CF-CABLELansen Configuration Cable: Needed to configure devices