Smart Metering Devices

Lansen Smart Metering Devices are designed for the wireless M-BUS protocol EN13757-3/4:2013 S1-M, C1 and T1 and are compatible with OMS V4 (Open Metering System).

The devices have sleek and discrete design and are easy to install. The hardware is manufactured using top of the line components and more than 50000 units have been deployed. The products are ready out of the box and can be ordered customized with specific configurations, such as transmission interval, manufacture code and data format.

Key features of these devices are:

  • Superb antenna design to achieve long range
  • AES-128 encryption, OMS V4
  • Very long battery life, typical at least 16 years
  • Wide operating temperature range
  • Works right out the box, with easy installation
  • Sabotage alarm if unit is opened or removed (not all products)
  • Low battery alarm

 

Pulse counter – (LAN-WMBUS-G2-P)

DEVICE
This pulse counter device is a plug-and-play pulse counter transmitter which turns any wired consumption meter, such as electricity meter, into a wireless meter. The device is easily mounted directly to a wall, but can also be mounted to a DIN rail if ordered with an adapter.

USAGE
The device can be connected to two meters, for example, one water meter and one electicity meters, and count the pulses for each meter separately. The values are then sent wirelessly at a configurable interval.

MEASUREMENTS
It is possible to connect up to two meters to the pulse counter, and the pulse counter will read the pulses separately for each device while our advanced debouncing algorithm makes sure only correct pulses are counted for high reliability.

LIFETIME
Up to 16 years (typically 14 years) battery lifetime, depending on configuration and operating temperature.

For more information about our devices, please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
QUICK INSTALLATION GUIDE[Link]
CONFIGURATION OF DEVICE[Link]
WMBUS DATA FORMAT[Link]
Accessories
Article nameDescription
LAN-CF-CABLELansen Configuration Cable: Needed to configure devices
LAN-DRA-01DIN rail adapter: Used for attaching devices to a DIN rail

Pulse Counter (optical probe) – (LAN-WMBUS-G2-OOP)

DEVICE
This pulse counter device is a plug-and-play pulse counter transmitter which turns any wired consumption meter with a LED, such as electricity meter, into a wireless meter. Furthermore, the pulse counter can be mounted directly to a wall or onto a DIN rail if the device is ordered with an adapter.

USAGE
The device can be connected to a meter with LED, for example, an electicity meters, and count each pulse from the LED. The values are then sent wirelessly at a configurable interval.

MEASUREMENTS
The device counts each flash on the LED on a meter to keep track on the consumption while our advanced debouncing algorithm makes sure only correct pulses are counted for high reliability.

LIFETIME
Up to 16 years (typically 14 years) battery lifetime, depending on configuration and operating temperature.

For more information about our devices, please contact us or check the document section below.

Documents
Document titleLink
DATASHEET[Link]
QUICK INSTALLATION GUIDE[Link]
CONFIGURATION OF DEVICE[Link]
WMBUS DATA FORMAT[Link]
Accessories
Article nameDescription
LAN-CF-CABLELansen Configuration Cable: Needed to configure devices
LAN-DRA-01DIN rail adapter: Used for attaching devices to a DIN rail